Phyaction GUIDANCE-E - Interpreting Error Codes

12.2 Interpreting error codes.
In case of an error, the following screen appears:
The unit gives an overview of the actual error. The error code can be traced in the error list (chapter
11.3).
Different codes:
Error number: defines the software module in which the error is detected.
Error value 1: the first error value which defines the individual test in the module which actually
generated the error
Error value 1: an additional value which may give more information about the detected error.
Error value 2: (not used).
Phyaction Guidance E/C – service manual version 0.5 Page 44