14.8 Display.
Removal: First complete 12.1, 12.6 and 12.7.
Remove the 4 black screws on the rear side of the display cover.
Gently slide out the display.
Remove the four screws of the display.
Caution: Put a soft tissue under the display assembly in order to avoid scratches.
Installation: The installation is in reverse order of the removal procedure.
Use a small screwdriver to guide the flatwire into the chassis.
Remove all the dust inside the plexi cover and on the display with a damp cloth.
Watch out: do not scratch the plexi front cover.
/ If the black paint on the inside of the plexi front cover is scratched, use a black marker to correct it.
Phyaction Guidance E/C – service manual version 0.5 Page 57
To Next Page
Loading...