tive one to terminal No. 7 (White/Black) (see
figure).
If there is no voltage, replace the control unit after
making sure that the fuses are not blown; other-
wise, check the cable harness between the starter
and the control unit and, as a last resource, re-
place the starter.
Lights list
LIGHT BULBS TABLE
Specification Desc./Quantity
1 High-beam light bulb Type: HALOGEN (H7)
Power: 12V - 55W
Quantity: 1
2 Low-beam bulb Type: HALOGEN (H1)
Power: 12V - 55W
Quantity: 1
3 Front tail light bulb Type: ALL GLASS
Power: 12V - 5W
Quantity: 2
4 Instrument panel bulb Type: ALL GLASS
Power: 12V - 2W
Quantity: 5
5 Front turn indicator bulb Type: Spherical
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
6 Helmet compartment light bulb Type: CYLINDRIC
Power: 12V - 5W
Quantity: 1
7 Rear turn indicator light bulb Type: Spherical
Power: 12V - 10W
Quantity: 1 RHS + 1 LHS
8 Stop light bulb Type: ALL GLASS
Power: 12V - 2.3W
Quantity: 5
9 Rear tail light bulb Type: SPHERICAL
Power: 12V - 5W
Quantity: 2
10 License plate light bulb Type: ALL GLASS
Power: 12V - 5W
Quantity: 1
Fuses
The electrical system is equipped with:
1. Four protection fuses «A» inside the helmet
compartment.
2. Four protection fuses «B» for the various circuits
of the electrical system, located inside the front
glove-box to the left.
Electrical system X9 Evolution 125
ELE SYS - 76
To Next Page
Loading...
