Setting Key Depth for Note-on and Enabling / Disabling contiguous Note-on
Key depth instructions
Piano keys 2 and 7 + Power ON - Press and hold keys 2 and 7
while turning the power on. A MIDI signal will sound confirming
that you are in the setup mode.
Piano keys 2 and 7 - Continue holding the two keys.
Piano key 16, 18, 20 or 21 - Select the depth desired for the
note to turn on. Minus 2 and Minus 1 will cause the note to turn
on earlier in the key travel, while plus 1 causes the note to turn
on later. (Refer to the following figure.)
Piano keys 2 and 7 - Release the two keys to save your setting
and exit setup.
Bass End of Keyboard
To Next Page
Loading...
