Troubleshooting
● The unit turns on but does not play. And
the "PLAY" and "REC" lamps are blinking
alternately.
o ProRecord is in initial setup mode.
Complete initial setup.
● Power does not turn on.
o Check to see that the power cord is
connected correctly. Insert the AC adaptor
firmly into the DC9V socket and AC outlet.
o Check for power at the AC outlet.
o If the problem persists, contact an
authorized repair source.
● Some notes play louder or softer than
others or not at all.
o It may be necessary to re-calibrate the
system or adjust volume levels. See page
30 to re-calibrate the system. If the black
key volume does not match the white keys,
see page 25. See pages 26 and 27 to
adjust the volume on individual notes.
● Pedal does not work, or is "stuck".
o It may be necessary to re-calibrate the
pedal sensors. See page 30. If the
problem persists, contact and authorized
repair source.
● The tempo of the metronome can’t be set
up.
o Tempo must be set by inputting a 3 digit
number using the piano keyboard. A
tempo setting of less than 100 must be
preceded by “0”. The allowable range is 30
to 250. Tempos less than 30 or more than
250 will not be recognized.
To Next Page
Loading...