Volume Control for Individual Keys（
（（
（Treble Keys）
））
）
Volume adjustment for individual keys in the upper half of the keyboard (45 through 88) is done in the
same way as the lower half except that the setup keys are different. In addition, there is a reset key
which returns all values to the default setting of “0”.
Volume Setting Instructions
1. Piano keys 2 and 6 + Power ON -To increase volume, press
and hold keys 2 and 6 while turning the power on. A chime
will sound to confirm that you are in the setup mode.
2. Piano keys - Continue holding the two keys.
3. Piano key 45, 46 … 87 or 88. - Select the note that needs to
be adjusted from the upper half of the keyboard (key 45
through 88) and press the key repeatedly until the desired
volume is reached. Adjust other notes as needed.
4. Piano keys - Release the two keys to save the setting and
exit setup mode.
Piano keys 2 and 4 + Power ON - To decrease volume,
press and hold 2 and 4 while turning on the power.
Then do steps (2), (3) and (4) as described above.
Piano keys 2 and 9 + Power ON - To reset all values to “0”,
press and hold keys 2 and 9 while turning on the power.
Then do step (4) as described above.
To Next Page
Loading...