Function description
Operating Manual PSENmlock mini, PSEN mlm 1 sa 1.1/2.1/2.2
1005802-EN-02-Draft
| 19
– Perform actions (example: poll updated actuator name)
– Specifically deactivate guard locking on individual PSEN mlm devices in a series con-
nection
The results of the sensor diagnostics can be checked already during the installation phase
via the display in the fieldbus module, without the need to connect the fieldbus module to
the network.
} Safety Device Diagnostics provide the following benefits for the fieldbus module when
wiring:
– Information is passed on via the fieldbus module directly to the network.
– Any assignment of inputs/outputs of the fieldbus module to the sensors.
– This prevents wiring errors and an expansion or reduction of the sensors is possible
without the need to change existing wiring.
– Wiring in accordance with IP20: Rapid installation in the control cabined is enabled.
– Wiring in accordance with IP67: Various passive junctions can be used (see Order
reference Accessories [
75]) to connect several sensors with only one cable from
the field in the control cabinet.
Further information on Safety Device Diagnostics can be found in Additional documents
that apply [
8].
To Next Page
Loading...
