Pilz PSENmlock mini - Safety Regulations; Safety Assessment; Additional Documents that Apply; Use of Qualified Personnel

Safety
Operating Manual PSENmlock mini, PSEN mlm 1 sa 1.1/2.1/2.2
1005802-EN-02-Draft
| 8
– Use in environments with high dust pollution,
} Use of the safety switch and actuator as mechanical stops,
} Use of the product outside the technical details (see Technical details [
63]).
2.2 Safety regulations
2.2.1 Safety assessment
Before using a device, a safety assessment in accordance with the Machinery Directive is
required.
As an individual component, the product meets functional safety requirements in accord-
ance with EN ISO 13849. However, this does not guarantee the functional safety of the
overall plant/machine. To achieve the relevant safety level of the overall plant/machine’s re-
quired safety functions, each safety function needs to be considered separately.
The safety switch does not have an emergency release.
2.2.2 Additional documents that apply
Please read and take note of the following documents.
Only when using Safety Device Diagnostics (SDD)
} Fieldbus module operating manual, for example SDD ES PROFINET
} System description "Safety Device Diagnostics"
When using passive junctions
} Operating manual for a passive junction
When using a series connection
} PSEN System Description, safety switch series connection (10065003)
You will need to be conversant with the information in these documents in order to fully un-
derstand this operating manual.
2.2.3 Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by persons who are competent to do so.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. In
order to inspect, assess and handle products, devices, systems, plant and machinery, this
person must be familiar with the state of the art and the applicable national, European and
international laws, directives and standards.
It is the company’s responsibility only to employ personnel who
} Are familiar with the basic regulations concerning health and safety / accident prevention,
} Have read and understood the information provided in the section entitled Safety
} Have a good knowledge of the generic and specialist standards applicable to the specific
application.
Draft