Installation
Operating Manual PSENmlock mini, PSEN mlm 1 sa 1.1/2.1/2.2
1005802-EN-02-Draft
| 48
9.4.2 Internal attachment with actuator b
Depending on the application, mounting plates/mounting brackets may be required for in-
ternal attachment of the safety switch with actuator b (see Internal attachment: Mounting of
safety switch and actuator using mounting set 1 (optional) [
52]).
Fig.: Internal attachment parallel to the rotational axis with mounting bracket/mounting plate
Legend
[A] Gate profile 30 x 30 mm
Legend
[R] Gate radius R
[X] X-dimension
[G] Handle on the outside
Factors that positively influence the smooth insertion of the actuator into the safety switch:
} Small X-dimension
To Next Page
Loading...
