90
CONTRAST
BRIGHT
COLOR
TINT
H. SHARP
V. SHARP
R HIGH
G HIGH
B HIGH
R LOW
G LOW
B LOW
H. POSITION
V. POSITION
V. SIZE
CLK FREQUENCY
CLK PHASE
SIDE MASK R
SIDE MASK G
SIDE MASK B
SUB VOLUME IN 1
SUB VOLUME IN 2
SUB VOLUME IN 3
SUB VOLUME IN 4
COLOR MODE
MIRROR MODE
BRIGHT ENHANCE
(VIDEO)
BRIGHT ENHANCE
(PC)
OSD
BAUD RATE
FULL MASK
FAN CONTROL
Before Beginning Adjustments
(NOTE 1) All functions have the same setting.
(NOTE 2) All functions have the same setting (when video signals are input).
(NOTE 3) INPUT 3 and INPUT 4 have the same setting (when PC signals are input).
With items that have the mark, DEFAULT or ALL DEFAULT will reset to the default value.
(NOTE 4) The SUB VOLUME can only be set to the DEFAULT value.
3) Integrator Mode
0 to (128) to 255
0 to (128) to 255
0 to (32) to 63
0 to (32) to 63
0 to (128) to 255
0 to (128) to 255
0 to (128) to 255
0 to (128) to 255
0 to (128) to 255
0 to (128) to 255
0 to (128) to 255
0 to (128) to 255
0 to (128) to 255
0 to (128) to 255
64 to (128) to 191
64 to (128) to 191
0 to (8) to 16
0 to 255
0 to 255
0 to 255
0 to 63
0 to 63
0 to 63
0 to 63
1/2
XY/X/Y/OFF
ON/OFF
ON/OFF
ON/OFF
1200 to 19200BPS
OFF/ON/RED/
GREEN/BLUE
AUTO/FIXED(MAX)
Variable Range
(STEP)
INPUT 1
Video Signal
Composite
INPUT 2
Video Signal
S-Video
(Y/C)
INPUT 3
Video Signal PC Signal
Component
RGB RGB
INPUT 4
Video Signal PC Signal
Component
RGB RGB
‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡ ‡‡
‡‡‡‡ ‡‡
‡‡‡‡ ‡‡
‡‡‡‡ ‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡‡‡‡‡
‡‡‡‡ ‡‡
‡‡
‡‡
‡
(NOTE 1)
‡ (NOTE 1)
‡ (NOTE 1)
‡
‡
‡
‡
‡
(NOTE 1)
‡ (NOTE 1)
‡ (NOTE 2) ‡ (NOTE 2)
‡‡
(NOTE 3) (NOTE 3)
‡ (NOTE 1)
‡ (NOTE 1)
‡ (NOTE 1)
‡ (NOTE 1)
(NOTE 4)
(NOTE 4)
(NOTE 4)
(NOTE 4)
To Next Page
Loading...
Need help?
General