Pioneer pdp-506hdg User Manual

29
En
Tuner Setup
08
English
Reducing video noise
For the individual channels, you can specify whether the
Plasma Display System should reduce video noise depending
on the levels of broadcasting signals.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “Program Setup” ( / then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9. For the password, see
“Using a password” on page 41.
4 Select “Manual Adjust” ( / then ENTER).
5 Select “Program Entry” ( / ).
6 Select a program number ( / ).
• You can select 1 through 99 with “Normal” selected, 2
through 69 with “Air (US Type)” selected, or 1 through
125 with “Cable (US Type)” selected.
7 Select “Tuner NR” ( / ).
8 Select “On” or “Off” ( / ).
9 Press HOME MENU to exit the menu.
NOTE
• This function may not achieve a satisfactory result,
depending on the conditions of broadcasting signals.
Setting Child Lock
Child Lock inhibits selected TV channels from being tuned and
watched.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “Program Setup” ( / then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9. For the password, see
“Using a password” on page 41.
4 Select “Manual Adjust” ( / then ENTER).
5 Select “Program Entry” ( / ).
6 Select a program number ( / ).
• You can select 1 through 99 with “Normal” selected, 2
through 69 with “Air (US Type)” selected, or 1 through
125 with “Cable (US Type)” selected.
7 Select “Child Lock” ( / ).
8 Select “Block” ( / ).
• The selection is switched between “View” and “Block”.
9 Press HOME MENU to exit the menu.
Suppressing audio distortion
You can suppress audio distortion that may be induced when
too strong audio signals are received in the selected channel.
NOTE
• High Deviation is selectable only when you have selected "D/
K" for "System" under "Using Manual Adjust" (page 28).
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “Program Setup” ( / then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9. For the password, see
“Using a password” on page 41.
4 Select “Manual Adjust” ( / then ENTER).
5 Select “Program Entry” ( / ).
6 Select a program number ( / ).
• You can select 1 through 99 with “Normal” selected, 2
through 69 with “Air (US Type)” selected, or 1 through
125 with “Cable (US Type)” selected.
7 Select “High Deviation” ( / ).
8 Select “Off”, “High”, “Mid”, or “Low” ( / ).
9 Press HOME MENU to ext the menu.
NOTE
• While watching a TV channel with any High Deviation
setting, you cannot change the sound multiplex mode.
Manual Adjust
Search
Program Entry
44.25MHz
1
Store
Tuner NR
Child Lock
View
Yes
On
Manual Adjust
Search
Program Entry
44.25MHz
1
Item Description
Off
(factory default)
Deactivates the function.
High Suppresses audio distortion slightly; however,
the audio volume is slightly lowered than when
Off is selected.
Mid Suppresses audio distortion moderately.
Low Suppresses audio distortion further; however,
the audio volume is further lowered.
Tuner NR
Child Lock
High Deviation
Off
On
Block
Manual Adjust
Search
Program Entry
44.25MHz
1
Tuner NR
Child Lock
View
View
On
High Deviation
Off
PDP506HDG.book Page 29 Monday, June 27, 2005 12:57 PM

Pioneer pdp-506hdg Specifications

General

Brand	Pioneer
Model	pdp-506hdg
Category	Monitor
Language	English