35
En
Adjustments and Settings
09
English
7 Press HOME MENU to exit the menu.
Using the 3DYC and I-P Mode
1 Press HOME MENU.
2 Select “Picture” ( / then ENTER).
3 Select “Pro Adjust” ( / then ENTER).
4 Select “Others” ( / then ENTER).
5 Select an item to be adjusted ( / then ENTER).
• You can select “3DYC” or “I-P Mode”.
6 Select the desired parameter ( / then ENTER).
7 Press HOME MENU to exit the menu.
NOTE
• For the 3DYC, the individual parameters are selectable only
when:
You have selected the analog tuner;
or You have selected INPUT 1, 2, 3, or 4 as the input source
with only a composite video cable in connection.
• For the I-P Mode, the individual parameters are not
selectable for the following input signals:
480p, 720p@60Hz, 576p, 720p@50Hz, 1080p@24Hz.
Sound adjustments
You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV
Selection option. See page 31.
1 Press HOME MENU.
2 Select “Sound” ( / then ENTER).
3 Select an item to be adjusted ( / ).
4 Select the desired level ( / ).
5 Press HOME MENU to exit the menu.
NOTE
• To restore the factory defaults for all items, press / to
select “Reset” in step 3, and then press ENTER. A
confirmation screen appears. Press / to select “Yes”, and
then press ENTER.
FOCUS
This shifts the sound coming direction (sound images) upward
and produces clear sound contours.
1 Press HOME MENU.
2 Select “Sound” ( / then ENTER).
3 Select “FOCUS” ( / ).
4 Select the desired parameter ( / ).
ACL
Performs such compensation that results in the optimum contrast
characteristics for images.
Selections Off Deactivates the ACL.
On Activates the ACL.
Gamma
Adjusts the gamma characteristics (image gradation characteristics).
Selections 1 Selects gamma characteristics 1.
2 Selects gamma characteristics 2.
3 Selects gamma characteristics 3.
3DYC
Optimizes characteristics for separating brightness signals and color
signals. This works for both video and still images.
Selections Off Deactivates the 3DYC.
High Enhanced 3DYC
Mid Standard 3DYC
Low Moderate 3DYC
I-P Mode
Perform optimum conversion from interlace signals to progressive
signals. This works for both video and still images.
Selections 1 Optimum for video images
2 Standard setting
3 Optimum for still images
Item
button button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decreases audio from the
right speaker.
Decreases audio from the
left speaker.
Bass
Balance
Treble
Reset
FOCUS
Front Surround
Headphone Output
Sub Volume
0
0
Off
Off
Main
2
Sound STANDARD
15
Reset
FOCUS
Front Surround
Off
Off
PDP506HDG.book Page 35 Monday, June 27, 2005 12:57 PM
To Next Page
Loading...
Need help?
General