Pioneer pdp-506hdg User Manual

48
En
Enjoying through External Equipment
11
Connecting HDMI equipment
To activate the HDMI terminal:
1 Press HOME MENU.
2 Select “Option” ( / then ENTER).
3 Select “HDMI Input” ( / then ENTER).
4 Select “Setting” ( / then ENTER).
5 Select “Enable” ( / then ENTER).
6 Press HOME MENU to exit the menu.
To specify the type of digital video signals:
1 Repeat steps 1 to 3 provided for “To activate the HDMI
terminal”.
2 Select “Video” ( / then ENTER).
3 Select the type of digital video signals ( / then ENTER).
• If you select “Auto”, an attempt will be made to identify
the type of digital video signals when digital video
signals are received.
4 Press HOME MENU to exit the menu.
NOTE
• If you select a parameter other than “Auto”, make such a
setting that results in natural color.
• If no image appears or images appear in inappropriate
colors, specify another digital video signal type.
• For the digital signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
1 Repeat steps 1 to 3 provided for “To activate the HDMI
terminal”.
2 Select “Audio” ( / then ENTER).
3 Select the type of audio signals ( / then ENTER).
• If you select “Auto”, an attempt will be made to identify
the type of audio signals when audio signals are
received.
4 Press HOME MENU to exit the menu.
NOTE
• If no sound is output, specify another audio signal type.
• For the signal types to be specified, check the operation
manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analog audio cables.
Item Description
Disable
(factory default)
Deactivates the HDMI terminal.
Enable Activates the HDMI terminal.
Item Description
Auto
(factory default)
Automatically identifies input digital video signals.
Color-1 Sets the format of digital video signals to the
Component 4:2:2.
Color-2 Sets the format of digital video signals to the
Component 4:4:4.
Color-3 Sets the format of digital video signals to the RGB.
I N OUT
CONTROL
ANT IN
SUB
WOOFER
INPUT 3
INPUT 2
SERVICE ONLY
S-VIDEOVIDEO
YC
B/PB CR /PR
R-AUDIO-L
INPUT 1
COMPONENT VIDEO
MONITOR OUT
VIDEOR-AUDIO-L
INPUT 3
HDMI
BLACK WHITE
AC IN
SYSTEM CABLE
Media Receiver (rear view)
HDMI equipment
HDMI cable
(commercially available)
Audio cable (commercially available)
Make this connection when inputting
analog audio signals.
Item Description
Auto
(factory default)
Automatically identifies input audio signals.
Digital Accepts digital audio signals.
Analog Accepts analog audio signals.
PDP506HDG.book Page 48 Monday, June 27, 2005 12:57 PM

Pioneer pdp-506hdg Specifications

General

Brand	Pioneer
Model	pdp-506hdg
Category	Monitor
Language	English