Pipistrel Sinus - Page 114

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
Attaching the brake lines to the wheels (using aluminum hydraulic line connectors):
 Apply grease to all the threads and place the fitting vertical. Be sure not to pull the brake
line too tight, allow a little freeplay. Remember the brake fittings have o rings and are
made from aluminum, so please don’t overtighten.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 114 of 267