Pipistrel Sinus - Page 149

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Using cable wire, firmly lockwire the oil plug located near the oil gasket, the bolt head
below the oil gasket and the loop in the engine crankcase.
 Do the same for the banjo fitting located on top of the crankcase. Fit it with insulated
rubber hosing and position the hosing as shown in the photos below.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 149 of 267