Pipistrel Sinus - Page 150

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 If you ordered an oil thermostat with your engine, then you can now mount the provided
elbow to the oil pump. Clamp some insulated rubber hosing to it and position the hose so
that it follows the hose you just clamped to the gold oil spout on the crankcase.
 If you did not order an oil thermostat with your engine then a uninsulated rubber hose
can be connected from the oil pump to the oil cooler's upper spout as shown in the
photos below
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 150 of 267