Pipistrel Sinus - Page 151

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Now step back from the engine and look to see which cables and hoses can be tied
together with plastic ties. This is done to keep the engine elements neat and tidy, as well
as to keep hosing away from elements which tend to get hot during operation.
 Now set up the pickups. Ensure that there is a gap of 0.35mm. If the gap is not correct
you can alter by adjusting the bolts beside them.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 151 of 267