Pipistrel Sinus User Manual

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Glue the carpet to the sides of the fuselage on the wing roots. Place the carpet
temporarily in the right location and trace it before gluing to know where to apply
adhesive. When marked, apply glue to both the carpet and the fuselage, allow to dry and
position in place. This time start at the front and work to the rear. Push down firmly for
the best bond.
 Use the metal roof supports as a guide and stretch the carpet back as you go. Make sure
not to cover the rear hole where the ailerons poke through.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 30 of 267

Pipistrel Sinus Specifications

General

Manufacturer	Pipistrel
Seats	2
Rate of climb	5.5 m/s (1, 080 ft/min)
Ballistic parachute rescue system	Optional
Engine	Rotax 912
Type	Motor glider