Pipistrel Sinus - Page 44

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Run the launching handle around the back of the rocket assembly blast tube to the metal
roofing brace above the passenger seat
 Fix the handle to the roofing brace as shown in the pictures below.
Mounting the parachute support straps to the fuselage:
 Wrap the support straps around the metal roof braces
 The support strap has a loop at each end. Pass one loop through the other and then feed
it through the roof of the cockpit
 Be sure the seam on the bridles is down, this is important to keep the water out of the
bridles.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 44 of 267