Pipistrel Sinus - Page 91

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 If need be, bend the horn slightly to ensure the perfect fit.
 When you're satisfied with the horn's position and fit, drill the mounting holes.
 Then remove the rudder's top post and install the elavator's horn using the large washers
and nyloc nuts. Be sure to apply Loctite 243 to the bolts' threads.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 91 of 267