User Manual of VDR-301N
43
5.3.2 Auto PVC
Choose Setup > Auto PVC and the page is displayed below. On this page, you can get a PVC automatically
by detecting function. Add or delete the PVC that you do not need.
Figure 5-22 Auto PVC
The following table describes the parameters:
Field Description
Probe WAN PVC
Click Probe to display WAN Permanent virtual circuit.
VPI
Virtual Path Identifier. This is read-only field and is selected on the
Select column of the Current ATM VC Table.
VCI
Virtual Channel Identifier. This is read-only field and is selected on the
Select column in the Current ATM VC Table. The VCI, together with
VPI, is used to identify the next destination of a cell as it passes through
the ATM switch.
To Next Page
Loading...
