Planet XGS3-24042 - Page 241

30-5
ipv6 dhcp pool <poolname>
no ipv6 dhcp pool <poolname>
To configure DHCPv6 address pool.
（2）To configure prefix delegation pool used by DHCPv6 address pool
Command
Explanation
DHCPv6 address pool Configuration
Mode
prefix-delegation pool <poolname>
[lifetime { <valid-time> | infinity}
{ <preferred-time> | infinity}]
no prefix-delegation pool <poolname>
To specify prefix delegation pool used by
DHCPv6 address pool, and assign usable
prefix to client.
（3） To configure static prefix delegation binding
Command
Explanation
DHCPv6 address pool Configuration
Mode
prefix-delegation
<ipv6-prefix/prefix-length>
<client-DUID> [iaid <iaid> ] [lifetime
{ <valid-time> | infinity}
{ <preferred-time> | infinity}]
no prefix-delegation
<ipv6-prefix/prefix-length>
<client-DUID> [iaid <iaid> ]
To specify IPv6 prefix and any prefix
required static binding by client.
（4） To configure other parameter of DHCPv6 address pool
Command
Explanation
DHCPv6 address pool Configuration
Mode
dns-server <ipv6-address>
no dns-server <ipv6-address>
To configure DNS server address for
DHCPv6 client.
domain-name <domain-name>
no domain-name <domain-name>
To configure domain name for DHCPv6
client.
4. To enable DHCPv6 prefix delegation server function on port
Command
Explanation
Interface Configuration Mode
ipv6 dhcp server <poolname>
[preference <value>] [rapid-commit]
[allow-hint]
no ipv6 dhcp server <poolname>
To enable DHCPv6 server function on
specified port, and binding
used DHCPv6
address pool.