Planet XGS3-24042 - Page 276

34-5
match community <community-list-name |
community-list-num > [exact-match]
no match community [<community-list-name |
community-list-num > [exact-match]]
Match a community
property access-
list. The
no match community
[<community-list-name
| community-list-num >
[exact-match]]
command deletes match
condition.
match interface <interface-name >
no match interface [<interface-name >]
Match by ports; The no
match interface
[<interface-name >]
command deletes match
condition.
match ip <address | next-hop> <ip-acl-name | ip-acl-num
| prefix-list list-name>
no match ip <address | next-hop> [<ip-acl-name |
ip-acl-num | prefix-list [list-name]>]
Match the address or
next-hop; The no match
ip <address | next-hop>
[<ip-acl-name |
ip-acl-num | prefix-list
[list-name]>] command
deletes match condition.
match metric <metric-val >
no match metric [<metric-val >]
Match the routing metric
value; The no match
metric [<metric-val >]
command deletes match
condition.
match origin <egp | igp | incomplete >
no match origin [<egp | igp | incomplete >]
Match the route origin;
The no match origin
[<egp | igp |
incomplete >] command
deletes match condition.
match route-type external <type-1 | type-2 >
no match route-type external [<type-1 | type-2 >]
Match the route type; The
no match route-type
external [<type-1 |
type-2 >] command
deletes match condition.
match tag <tag-val >
no match tag [<tag-val >]
Match the route tag; The
no match tag
[<tag-val >] command
deletes match condition.
3. Define the set clause in route-map
Command
Explanation
Route-map configuration mode