Planet XGS3-24042 - Page 395

46-13
BGP protocol unicast address family
mode and VRF address family mode
neighbor (A.B.C.D | X:X::X:X |
WORD) capability graceful-restart
no neighbor (A.B.C.D | X:X::X:X |
WORD) capability graceful-restart
Set a label for neighbor, it takes GR parameter
when send OPEN messages.
3. Configure restart-time
Command
Explanation
BGP route configuration mode
bgp graceful-restart restart-time
<1-3600>
no bgp graceful-restart restart-time
<1-3600>
Configure BGP GR’s restart-
time (Receiving
Speaker enables a timeout timer for a neighbor,
it uses the restart-time as
the timeout). A
restart-time specifies the longest wai
ting time
from Receiving Speaker finds restarting to the
received OPEN messages. If Receiving Speaker
does not receive OPEN messages after exceed
the time, it can delete SATLE rout
e saved by
neighbor.
4. Configure restart-time for neighbor
Command
Explanation
BGP protocol unicast address family
mode and VRF address family mode
neighbor (A.B.C.D | X:X::X:X |
WORD) restart-time <1-3600>
no neighbor (A.B.C.D | X:X::X:X |
WORD) restart-time <1-3600>
Configure restart-time for neighbors
, no
command restores the default time.
5. Configure stale-path-time for BGP GR
Command
Explanation
BGP route configuration mode