48-22
Figure 48-4 Flooding of SA messages
Figure 48-5 Flooding of SA messages with mesh group configuration
Configuration steps are listed as below:
Router A:
Switch#config
Switch(config)#interface vlan 1
Switch(Config-if-Vlan1)#ip address 10.1.1.1 255.255.255.0
Switch(Config-if-Vlan1)#exit
Switch(config)#interface vlan 2
Switch(Config-if-Vlan2)#ip address 20.1.1.1 255.255.255.0
Switch(Config-if-Vlan2)#exit
Switch(config)#interface vlan 3
M 1
To Next Page
Loading...
