Planet XGS3-24042 - Page 602

67-3
1. Create ULPP group globally
Command
Expalnation
Global mode
ulpp group <integer>
no ulpp group <integer>
Configure and delete ULPP group
globally.
2. Configure ULPP group
Command
Explanation
ULPP group configuration mode
preemption mode
no preemption mode
Configure the preemption mode of
ULPP group. T
he no operation
deletes the preemption mode.
preemption delay <integer>
no preemption delay
Configure the preemption delay, the
no operation restores the default
value 30s.
control vlan <integer>
no control vlan
Configure the sending control VLAN,
no operation restores the default
value 1.
protect vlan-reference-instance
<instance-list>
no protect vlan-reference-instance
<instance-list>
Configure the protection VLANs, the
no operation deletes the protection
VLANs.
flush enable mac
flush disable mac
Enable or disable sending the flush
packets which update MAC address.
flush enable arp
flush disable arp
Enable or disable sending the flush
packets which delete ARP.
description <string>
no description
Configure or delete ULPP group
description.
Port mode
ulpp control vlan <vlan-list>
no ulpp control vlan <vlan-list>
Configure the recei
ving control
VLANs, no operation restores the
default value 1.
ulpp flush enable mac
ulpp flush disable mac
Enable or disable receiving the flush
packets which update the MAC
address.
ulpp flush enable arp
ulpp flush disable arp
Enable or disable receiving the flush
packets which delete ARP.