EasyManua.ls Logo

Plockmatic BK5030 - Page 5

Plockmatic BK5030
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note
• The indications like front and rear, left and right refer to the paper transport direction.
• The operator manual always has to be available at the place of use of the machine.
• In the interest of technical development the company reserves the right to make alterations to
specicationswithoutpriornotice!
• Dispose of replaced parts and consumables in accordance with local regulations.
CAUTION:
• The machine and its peripherals must be installed and maintained by a customer service repre-
sentative who has completed the training course on those models.
• Always follow all warnings marked on, or supplied with, the equipment.
• When you disconnect the power plug from the wall outlet, always pull the plug (not the cable).
• Turn off the power and disconnect the power cord before you move the machine. While mov-
ing the machine, always exercise care and make sure that the power cord will not be damaged
under the machine.
• Always contact service if relocating the equipment.
• Do not move the machine while the machine is running.
• Do not open covers while the machine is running.
• Do not switch off the power while the machine is running. Make sure the machine cycle has
ended.
• Lay the power cord in a way that nobody will stumble over it. Do not place things on the cord.
• Neverattemptanymaintenancefunctionthatisnotspecicallydescribedinthisdocumenta-
tion.
• Alwayskeepmagnetsandalldeviceswithstrongmagneticeldsawayfromthemachine.
• If the place of installation is air-conditioned or heated, do not place the machine where it will be:
• Subject to sudden temperature changes.
• Directly exposed to cool air from an air-conditioner.
• Directly exposed to heat from a heater.
• If the machine is not used over an extended period of time it should be unplugged to prevent
damage in the case of overload.
General safety, continued

Other manuals for Plockmatic BK5030

Related product manuals