1-46
November 2012
Trimmer
Installation
TRIMMER INSTALLATION
31. A. Set up the Cover Feeder to Cover OFF and remove all covers from the bin.
Use the Purge mode to completely empty the Cover Feeder from covers.
B. Prepare a 15mm high stack of A3/11 x 17” covers.
C. Repeat step 27 B to 27 G.
32. Set up the Booklet maker to A3/11 x 17” paper size.
33. Send one A3/11 x 17” job to the Booklet maker system.
34. Check that the covers are correctly fed into the Booklet maker.
To Next Page
Loading...
