Polaris RANGER 1000 2021 User Manual

7.22
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
GEAR CLUSTER DISASSEMBLY
1. Remove the bearing from the reverse shaft using a
bearing puller. Remove the retaining ring and slide
the washers, high gear and needle bearing off the
reverse shaft.
q
Park/Low Shift Dog
u
Reverse/High Shift
Dog
w
Thrust Washer
i
Snap Ring
e
Low Gear
o
High Gear
r
Reverse Shaft
a
Bearing
t
Reverse Gear
s
Chain
y
Needle Bearing
2. Remove the Reverse/High shift dog.
3. Remove the snap ring, washer, needle bearing, and
reverse gear from the reverse shaft.
4. If necessary, disassemble the other end of the
reverse shaft. Remove the bearing , Park/Low shift
dog, retaining ring, washer, low gear and needle
bearing from the reverse shaft.
SNORKEL TUBE REMOVAL / DISASSEMBLY
CAUTION
The pinion shaft must be removed prior to removing the
snorkel tube assembly. Failure to remove pinion shaft
will result in damage to the snorkel tube or LH
gearcase.
1. Use the snorkel tube tool to remove the snorkel tube
and front output shaft as an assembly.
Snorkel Tube Tool:
PU-52547
TRANSMISSION

Polaris RANGER 1000 2021 Specifications

General

Brand	Polaris
Model	RANGER 1000 2021
Category	Offroad Vehicle
Language	English