Note: You cannot Resume function to assign to a feature key. Instead, use the
Conference function.
Resume a Call on an Expansion Module
You can resume calls placed on hold by other contacts from your expansion module connected to
supported VVX business IP phone, OBi edition.
A flashing red LED light on a line key on the expansion module indicates a call is on hold on the contact's
line.
Procedure
» Press the line key corresponding to the line with the held call.
Related Links
Polycom VVX EM50 Expansion Modules on page 69
End a Call
You can end active calls at any time. To end a held call, resume the call and then end it.
Procedure
1. On the Current Calls screen, highlight the call.
2. Press the End soft key.
Ignoring or Rejecting Incoming Calls
When you receive an incoming call, you can choose to ignore or reject the call instead of answering. You
can reject or ignore incoming calls, reject incoming calls from a specific contact, or enable Do Not Disturb
to reject all calls for a brief period of time.
Reject Incoming Calls
When you receive an incoming call, you can reject or ignore incoming calls, reject incoming calls from a
specific contact, or enable Do Not Disturb to reject all calls.
Procedure
» Press the Reject soft key.
Rejecting Calls with Do Not Disturb
Do Not Disturb (DND) enables you to set your phone to automatically reject calls when you don’t want to
be interrupted.
Related Links
Icons and Status Indicators on page 22
Audio Calls
30
To Next Page
Loading...
Need help?
General
