Poly Polycom VVX Series User Manual

You can stop the screen saver at any time by pressing any key or lifting the headset.
Procedure
1. Press Home .
2. Go to Preferences > Screen Saver.
3. Press Enable soft key.
4. Press Home to exit Preferences and confirm your selection.
Set the Screen Saver Wait Time
You can set the amount of time the phone is idle before the screen saver starts.
Procedure
1. Press Home .
2. Go to Preferences > Screen Saver Delay.
3. Press the Edit softkey.
4. Using the dialpad, enter the number of seconds the phone is idle before the screen saver
activates.
5. Press the Save softkey.
6. Press Home to confirm your selection.
Enable Screen Saver Slide Show
You can set your screen saver to display a slide show.
You can choose to use all pictures stored on the phone, or pictures in the cloud.
Procedure
1. Press Home .
2. Go to Preferences > Screen Saver Type.
3. Press Enter repeatedly to cycle through the available screen saver types.
4. After you select Slide Show, press Home to exit Preferences and confirm your selection.
Make the Screen Saver a Blank Screen
You can set your screen saver to display a blank screen.
Procedure
1. Press Home .
2. Go to Preferences > Screen Saver Type.
3. Press Enter repeatedly to cycle through the available screen saver types.
4. After you select Blank Screen, press Home to exit Preferences and confirm your selection.
VVX Business IP Phone Settings
60

Poly Polycom VVX Series Specifications

General

Brand	Poly
Model	Polycom VVX Series
Category	IP Phone
Language	English