Set Up Call Forward No Answer
Configures system-wide call forwarding on no-answer.
Note that per-service call forward is also configurable under Voice Services.
Procedure
1. Press Home .
2. Go to Preferences > Call Fwd Busy.
3. Press the Edit soft key.
4. Configure the settings within the edit menu:
• Use Enter to toggle between Enabled and Disabled.
• Enter the call forward number in the Destination Number field.
• Use Enter to cycle through the list of voice services.
• Use Enter to set the number of times the phone rings before forwarding the call.
5. Press Home to exit Preferences and confirm your selection.
Forward an Incoming Call
You can forward an incoming call directly to a contact without answering the call.
Procedure
1. Press the Call Forward soft key.
The Call Fwd Unconditional screen displays.
2. Press the Enable softkey.
Conference Calls
When you initiate a conference call, you can hear audio for two or more contacts, manage conference
participants, and join calls into a conference or split a conference into individual calls.
Start a Conference Call
The phone supports up to 3-way conferencing using local bridging.
After starting a 3-way conference call, you can see all connected parties.
Procedure
1. Call a contact.
2. When the contact answers, press the Hold soft key.
3. Call a second contact.
4. When the contact answers, highlight the held call on the Calls screen and select Add to Conf.
Audio Calls
34
To Next Page
Loading...
Need help?
General
