Microphones and Speakers
Polycom, Inc. 4–13
system, and the other speaker on the left side. The system reverses the left and
right channels for the far site, as shown in the following illustration. This
ensures that the sound comes from the appropriate side of the room.
For best results, place the speakers about 60° apart as seen from the center of
the conference table.
If you use the subwoofer in the Polycom StereoSurround kit, place it beside a
wall or in a corner near the speakers.
Setting the Speaker Volume
To set the volume of an external speaker system:
1 Go to System > Diagnostics >Audio > Speaker Test.
2 Start the speaker test.
Left
Right Left
Right
Sending stereo
Receiving stereo
Left speaker
Connect to left
audio output
(white)
Right speaker
Connect to right
audio output (red)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
