Administrator’s Guide for Polycom HDX Systems
1–10 Polycom, Inc.
Polycom HDX 9000 Series Indicator Light
The following figure shows the location of the power switch and indicator
light.
The indicator light on the front of the Polycom HDX 9000 series system
provides this information:
Powering On the Polycom HDX 8000 Series, Polycom HDX 7000 Series, or
Polycom HDX 6000 Series Systems
To power on the Polycom HDX 8000 series, Polycom HDX 7000 series, or
Polycom HDX 6000 series system, do one of the following:
• Press the power button on the remote control.
• Press the power switch on the front of the system.
The Polycom splash screen is displayed within about 10 seconds.
Indicator Light System Status
Off System is powered off.
Steady green light System is initializing.
System is awake.
Blinking green light System received an IR (infrared) signal.
Steady amber light System is asleep.
Alternating green and amber lights System is in software update mode.
System is in factory restore mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com