Networks
Polycom, Inc. 2–15
3 Enter a prefix or suffix for each bandwidth you want to allow for gateway
calls.
The use of suffixes and prefixes is dependent on the gatekeeper, gateway
capability, and gateway configuration. Associating prefixes and suffixes
with particular bandwidths on your gateway can optimize the use of
bandwidth by your organization. Be sure the gateway is configured to use
the same prefixes and suffixes you define for the system.
Specifying SIP Settings
If your network supports the Session Initiation Protocol (SIP), you can use SIP
to connect IP calls.
To specify SIP Settings:
1 Do one of the following:
— In the local interface, go to System > Admin Settings > Network > IP
> SIP Settings (select if necessary).
— In the web interface, go to Admin Settings > Network > IP Network
> SIP Settings.
2 Configure these settings:
If you installed the Microsoft real-time video (RTV) software option key, several of
the SIP configuration fields described in the following table are named differently to
align with Microsoft terminology.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
