Administrator’s Guide for Polycom HDX Systems
10–10 Polycom, Inc.
Unpairing
You can unpair the Polycom Touch Control and HDX system using the web
interface.
To unpair the Polycom Touch Control and Polycom HDX using the web interface:
1 In the web interface, select Admin Settings > Polycom Touch Control.
2 Disable Allow Polycom Touch Control to Pair with this System or select
Forget this Device.
The HDX system cannot pair with any Polycom Touch Control while
Allow Polycom Touch Control to Pair with this System is disabled.
Managing the Polycom Touch Control Remotely
You can remotely manage certain features of your Polycom Touch Control
using Microsoft Internet Explorer version 9 and later.
To open the remote management window for the Touch Control:
1 In one of the supported web browser windows, enter the IP address of
the Touch Control.
2 In the Login window, enter the ID and Password you use to access the
administrative features of the Touch Control.
You can access the remote management features by using the Dashboard or
the Navigation menu. Return to the Dashboard by clicking the Home icon.
Download Logs
Downloads the Touch Control logs to the location specified in the device.
Network Settings
Specifies whether the system acquires an IP address automatically or
manually. With the manual method, the other settings that are available in the
Touch Control become available on the web.
Pairing
Pairs and unpairs from Polycom HDX, Polycom SoundStructure
®
, and
Polycom Immersive Telepresence (ITP) systems. Before you can connect to or
pair with a device, you must know the device’s IP Address and the User Name
and Password used to connect.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
