Polycom HDX 6000 Series User Manual

Administrator’s Guide for Polycom HDX Systems
2–36 Polycom, Inc.
A connected SoundStation
®
IP 7000 conference phone can use this analog
phone line to make regular telephone calls when the Polycom HDX system is
configured as described in Configuring Telephony.
Configuring Telephony
To configure telephony options:
1 Do one of the following:
— In the local interface, go to System > Admin Settings > Network >
Telephony (select if necessary).
— In the web interface, go to Admin Settings > Network > Telephony.
2 Configure these settings on the Telephony screen:
To configure the analog phone line (POTS line):
1 Go to System > Admin Settings > Network > Telephony in the local
interface or go to Admin Settings > Network > Telephony in the web
interface.
2 Enter the System Telephone Number for the analog phone line.
The country setting must be configured correctly on the Polycom HDX system to
ensure proper operation of the phone line and to comply with local telephony
regulations.
Setting Description
Room Telephone Number Enter the telephone number of the room where the
system is located.
System Telephone
Number
Polycom HDX 9000 series
Polycom HDX 8000 series
Polycom HDX 4000 HD
Polycom HDX 4000
Specifies the analog phone number of the system,
including country and area codes for the system’s
location.
Outside Line Dialing
Prefix
Polycom HDX 9000 series
Polycom HDX 8000 series
Polycom HDX 4000 HD
Polycom HDX 4000
Specifies the dialing prefix used to call outside the
network.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Polycom HDX 6000 Series Specifications

General

Brand	Polycom
Model	HDX 6000 Series
Category	Conference System
Language	English