Administrator’s Guide for Polycom HDX Systems
3–4 Polycom, Inc.
2 Configure these settings on the Monitors screen:
Setting Description
Monitor 1 Specifies the monitor’s aspect ratio determined by the
HDX system:
•4:3 — Regular TV monitor
•16:9 — Wide-screen monitor
Video Format Specifies the monitor’s format. For a list of available
formats, refer to the information for your system in
Connecting Monitors on page 3-1.
Note: If you use 16:9, you might also need to set up the
monitor for full-screen display if the monitor does not
automatically do so. In the monitor’s setup menu,
choose the setting that stretches the picture uniformly
without clipping the edges, which is usually called Full,
Wide screen, or 16x9.
Use this setting: Not this setting:
Resolution Specifies the resolution for the monitor.
Output Upon Screen
Saver Activation
Specifies the screen saver output for Monitor 1.
Specifies whether black video or no signal is sent to the
monitor when the system goes to sleep and the screen
saver activates.
Select Black if you want to display screen saver text.
This is the recommended setting to prevent burn-in for
TV monitors.
Select No Signal if you want the display to react as if it
is not connected when the system goes to sleep. This is
the recommended setting for VGA monitors and
projectors, as well as Polycom HDX media carts with
1080p displays.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
