Chapter 2-First Time Installation and Configuration
Polycom, Inc. 2-15
11 Click Next.
12 If you selected H.323, click Next and go to Step 14.
Table 2-5 Fast Configuration Wizard – Gatekeeper
Field Description
Gatekeeper Select Specify to enable configuration of the gatekeeper IP address.
When Off is selected, all gatekeeper options are disabled.
Primary Gatekeeper
IP Address or Name Enter either the gatekeeper’s host name (if a DNS Server is used) or
IP address.
MCU Prefix in
Gatekeeper
Enter the string with which the MCU registers itself with the
gatekeeper.
The gatekeeper uses this string to identify the MCU when forwarding
calls to it.
H.323 endpoints use this number as the first part of their dial-in string
when dialing the MCU.
Aliases
Alias The alias that identifies the Collaboration Server’s Signaling Host
within the network. Up to five aliases can be defined for each
Collaboration Server.
Note: When a gatekeeper is specified, at least one alias must be
entered in the table.
Additional aliases or prefixes may also be entered.
Type The type defines the format in which the card’s alias is sent to the
gatekeeper. Each alias can be of a different type:
• H.323 ID (alphanumeric ID)
• E.164 (digits 0-9, * and #)
• Email ID (email address format,
e.g. abc@example.com)
• Participant Number (digits 0-9, * and #)
Note: Although all types are supported, the type of alias to be used
depends on the gatekeeper’s capabilities.
To Next Page
Loading...
