Chapter 2-First Time Installation and Configuration
Polycom, Inc. 2-21
These flags can be modified later, if required, by selecting the System Configuration
option from the Setup menu. For more information, see the Polycom® RealPresence
Collaboration Server 800s Administrator’s Guide, "Modifying System Flags” on page 21-1.
22 Click Save & Close.
The system confirms successful configuration.
23 In the Success Message box, click OK.
24 In the Reset Confirmation dialog box, click Yes.
25 In the Please wait for system reset message box, click OK.
26 Refresh the browser periodically until the Login screen is displayed.
27 When the Login screen is displayed, enter your Username and Password and click Login.
Selecting the Collaboration Server Web Client Languages
By default, the Collaboration Server Web Client interface is displayed only in English.
However, the system administrator can choose the languages available for selection on the
Login screen. These languages are represented by flags.
To choose the languages for selection in the Login screen:
1 On the Collaboration Server menu, click Setup > Customized Display Settings >
Multilingual Setting.
Terminate
Conference when
Chairperson Exits
When Yes is selected (default), the conference ends when the
chairperson exits even if
there are other participants connected.
When No is selected, the conference automatically ends at the
predefined end time, or when all the participants have disconnected
from the conference.
Auto Extend
Conferences
When Yes is selected (default), allows conferences running on the
Collaboration Server to be automatically extended as long
as there
are participants connected and there are available resources.
The maximum extension time allowed by the MCU is 30 minutes.
Table 2-10 Fast Configuration Wizard – System Flags (Continued)
Field Description / Default
System restart may take up to five minutes.
The Fast Configuration Wizard configures the Default IP Network Service with common parameters.
Specific or additional settings (e.g. for ICE, or Secured Mode) should be performed once the initial
configuration is complete. For detailed description of the IP Network Services, see the Polycom®
RealPresence Collaboration Server 800s Administrator’s Guide, Network Services.
To Next Page
Loading...
