Polycom RealPresence - Page 38

Polycom® RealPresence Collaboration Server 800s Getting Started Guide
2-18 Polycom, Inc.
15 Click Save & Continue.
The IP Network Service is created and confirmed.
16 Click OK.
The RMX Time dialog box is displayed.
17 Set the RMX Time using one of the three available options: setting the RMX Time
manually, clicking the Retrieve Client Time button, or using the NTP Servers options.
H.323 Authentication Click this check box to enable H.323 server authentication.
Select this check box only if the authentication is enabled on the
gatekeeper, to enable the Collaboration Server to register with the
gatekeeper. If the authentication is enabled on the gatekeeper and
disabled on the Collaboration Server, calls will fail to connect to the
conferences.
Leave this check box cleared if the authentication option is disabled
on the gatekeeper.
User Name Enter the user name the Collaboration Server
will use to authenticate itself with the
gatekeeper. This name must be defined in the
gatekeeper.
These fields can
contain up to 64
ASCII characters.
Password Enter the password the Collaboration Server
will use to authenticate itself with the
gatekeeper. This password must be defined in
the gatekeeper.
Table 2-7 Default IP Network Service – Security (Continued)
Field Description
Table 2-8 Fast Configuration Wizard - Collaboration Server Time
Field Description
GMT Date The date at Greenwich, UK.
Local Time The MCU’s local time settings, are calculated from the GMT Time
and the GMT Offset.
GMT Time Displays the MCU’s current GMT Time settings.
Option 1: Manually setting the Collaboration Server time:
• Using the Up or Down arrows alter the GMT Time and the GMT
Offset to set the Collaboration Server time.