Chapter 3-Basic Operation
Polycom, Inc. 3-17
The Participants tab opens.
When defining a new conference, the Participants List is empty.
The following table describes the information displayed in the Participants List and the
operations that can be performed.
Table 3-3 New Conference – Participants Tab
Column / Button Description
Participants List
Name A Unicode field that displays the participant’s name and an icon
representing the endpoint type: Voice or Video.
IP Address/Phone Indicates the IP address or phone number of the participant’s
endpoint.
• For dial-out connection, displays the IP address or phone
number of the endpoint called by the RealPresence
Collaboration Server 800s.
• For dial-in connection, displays the participant’s IP address or
phone number used to identify and route the participant to the
appropriate conference.
Alias Name/SIP
Address (IP Only)
Displays the alias name of an H.323 endpoint or the SIP URL.
Network The network communication protocol used by the endpoint to connect
to the conference: H.323 or SIP .
Dialing Direction Select the dialing direction:
• Dial-in – The participant dials in to the conference. This field
applies to IP participants only.
• Dial-out – The MCU dials out to the participant.
•
Encryption Displays whether the endpoint uses encryption for its media.
The default setting is Auto, indicating that the endpoint must connect
according to the conference encryption setting.
To Next Page
Loading...
