Chapter 3-Basic Operation
Polycom, Inc. 3-39
No status indicator display in the Status column means that the conference is running
without problems.
One or more of the status indicators listed in Table 3-6 may appear in the Status column.
Table 3-6 Conferences – Monitoring Information
Field Description
Display Name
Displays conference name and type of conference:
•
– AVC Conference running in CP mode.
• – The AVC conference has been secured using the *71 DTMF
code. For details, see "Secured Conference Monitoring (AVC CP Only)”
on page 3-41.
• – AVC Operator Conference
• . – Media Relay - SVC-based Conference.
• – Mixed CP and SVC Conference
Status Displays the status of the ongoing conference.
If there is no problem with the participant’s connection no indication is
displayed.
If one of the following statuses occur, the appropriate indication is
displayed, proceeded by a warning icon ( ).
• Audio – There is a problem with the participant’s audio.
• Empty – No participants are connected.
• Faulty Connection – Participants are connected, but the connection is
problematic.
• Not Full – Not all the defined participants are connected.
• Partially Connected – The connection process is not yet complete; the
video channel has not been connected.
• Single Participant – Only one participant is connected.
• Video – There is a problem with the participant’s video.
• Content Resource Deficiency – Content will not be sent to legacy
endpoints.
• Awaiting Operator – A participant has requested operator assistance.
ID The Conference ID assigned to the conference.
Start Time Conference start time.
End Time The time the conference is expected to end.
Dial in Number(1) The Conference dial in number for ISDN/PSTN participants.
SIP Registration The status of registration with the SIP server:
• Not configured - Registration with the SIP Server was not enabled in
the Conference Profile assigned to this conferencing Entity.
In Multiple Networks configuration, If one service is not configured
while others are configured and registered, the status reflects the
registration with the configured Network Services. The registration
status with each SIP Server can be viewed in the Properties - Network
Services dialog box of each conferencing entity.
To Next Page
Loading...
