Polycom Trio Visual+ User Manual

Device and Software Support
Polycom, Inc. 175
Software Update using Windows Update Server
You can use Windows Update Server to update software on the Polycom Trio 8800 and 8500 systems
connected as a USB device to a Microsoft Surface Pro or to a computer running Windows 10 when you set
the Base Profile to Skype USB Optimized.
The Windows Update is enabled by default on the Polycom Trio 8500 and 8800 systems.
Software Update using Windows Update Server Parameters
The following table lists the parameter to configure the Software update using Windows Update feature.
Manually Update UC Software using Windows Update
You can manually update the software for Polycom Trio 8800 and 8500 systems connected to a Windows
10 computer or Microsoft Surface Pro through Windows Upgrade server.
To manually run the software upgrade for Polycom Trio 8800 system:
1 Connect the Polycom Trio system to a computer running Windows 10 operating system.
2 Right click Polycom Trio 8800 USB-Interface under Universal Serial Bus devices in the Device
Manager.
3 Select Update Driver Software.
site.cfg prov.polling.time Specify the polling start time in
absolute or random polling
mode you choose with
prov.polling.mode .
03:00 (default)
hh:mm
site.cfg prov.polling.timeRandomEn
d
The polling stop time when the
polling mode is set to random.
NULL (default)
hh:mm
Software Update using Windows Update Server Parameters
Parameter and
Temp l at e
Permitted Values
feature.usb.device
.msrSoftwareUpdate
features.cfg
1 (default) - Enable the software update using Windows Update feature.
0 - Disable the software update using Windows Update feature.
Automatic Software Update Parameters
Template Parameter Permitted Values

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English