Polycom Trio Visual+

Video Features
Polycom, Inc. 38
features.cfg video.camera.preset.h
ome.pan
Set the pan coordinate for a camera
home preset.
Default values are set by and depend
on the camera you are using.
0 - 1000
No
features.cfg video.camera.preset.h
ome.tilt
Set the tilt coordinate for a camera
home preset.
Default values are set by and depend
on the camera you are using.
0 - 1000
No
video.cfg video.camera.preset.h
ome.uponIdle.delay
Set the number of minutes after the
idle timeout expires to move the
camera to the home preset.
0 (default)
0 - 3600
No
video.cfg video.camera.preset.h
ome.uponIdle.enabled
0 (default) - Do not move the camera
to the home preset when the Trio
system is idle.
1 - Move the camera to the home
preset when the Trio system is idle.
No
video.cfg video.iFrame.period.o
nBoard
Set the interval in seconds for the VC4
encoder.
180 (default)
300
features.cfg video.camera.preset.h
ome.zoom
Set the zoom coordinate for a camera
home preset.
Default values are set by and depend
on the camera you are using.
0 - 1000
No
video.cfg video.camera.x.autoWh
iteBalance
Set for per-camera configuration when
you specify the camera type using the
video.camera.x.type parameter.
1 – Enable auto white balance. This
overrides the
video.camera.whiteBalance
parameter.
0 – Disable auto white balance.
No
Video and Camera Parameters
Template Parameter Permitted Values
Change Causes
Restart or Reboot