Polycom Trio Visual+ User Manual

Video Features
Polycom, Inc. 47
The following table lists video codec parameters and specifies the video codec preferences for the Polycom
Trio 8800 system. To disable codecs, set the value to 0. A value of 1 indicates the codec is the most
preferred and has highest priority.
.
Video Codec Parameters
Parameter
Temp l at e
Permitted Values
video.codecPref.H264
video.cfg
Set the H.264 video codec preference priority.
6 (default)
0 - 8
video.codecPref.H264HP
video.cfg
Set the H.264 High Profile video codec preference priority.
2 (default) - Indicates the codec is the most preferred and has
highest priority.
0 - 8
video.codecPref.H264HP.packetizationM
ode0
video.cfg
5 (default)
0 - 8
video.codecPref.Xdata
video.cfg
7 (default)
0 - 5
Set the Remote Desktop Protocol (RDP) codec preference
priority. 1 indicates the codec is the most preferred and has
highest priority. The value 4 is for Skype Base Profile.
video.codecPref.XH264UC
video.cfg
Set the Microsoft H.264 UC video codec preference priority.
1 (default)
0 - 8
video.codecPref.XUlpFecUC
video.cfg
Set the forward error correction (FEC) codec priority.
8 (default)
0 - 7
video.conf.addVideoWhenAvailable
new.cfg
0 (default)
1 - When Polycom Trio system is added to a conference by
another participant via digit dialing, the Trio system adds video if
video is available on the conference.
video.conf.profile
video.cfg
Configure the video media profile request sent to the video
conference server.
3 (default) - Identifies the 540p profile.
2 - 7
video.conf.simulcast.enabled
video.cfg
1 (default) - Allow sending two different video media resolutions
on a Skype for Business video conference call.
video.profile.H264.payloadType.packet
izationMode
video.cfg
99 (default)
0 - 127
Set the H.264 payload type with packetization mode set to 0.

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English