Polycom Trio Visual+ User Manual

Content
Polycom, Inc. 57
Polycom Trio 8800 for AirPlay Parameters
Use the following parameters to configure the Polycom Trio 8800 system for AirPlay certified devices.
Polycom Trio 8800 for AirPlay Parameters
Temp l at e Parameter Permitted Values Restart Causes
Restart or Reboot
features.cfg content.airplayServer.au
thType
none (default) - No security code
for AirPlay certified devices is
required.
passcode - Use a security code
to authenticate AirPlay certified
devices.
No
features.cfg content.airplayServer.di
scovery.bluetooth.enable
d
Set to allow Airplay discovery
over Bluetooth.
1 (default) - Enables Polycom
Trio 8800 to be discoverable to
AirPlay-certified devices over
Bluetooth. Turns Bluetooth radio
on when
feature.bluetooth.enabled=
1
.
0 - Polycom Trio 8800 is not
discoverable to AirPlay-certified
devices over Bluetooth.
Note: To use this feature, enable
the parameter
feature.bluetooth.enabled .
No
features.cfg content.airplayServer.en
abled
0 (default) - Disable the content
sink for AirPlay certified devices.
1 - Enable the content sink for
AirPlay certified devices.
No
features.cfg content.airplayServer.ma
xResolution
Set the content resolution.
720p (default)
1080p
1024x1024
960x960
480x480
No
features.cfg content.airplayServer.na
me
Specify a system name for the
local content sink for AirPlay
certified devices. If left blank the
previously configured or default
system name is used.
NULL (default)
No

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English