Polycom Trio Visual+ User Manual

Content
Polycom, Inc. 60
Troubleshooting
This section provides solutions to common issues you may have using Wireless Display on the Polycom
Trio 8800 system.
My Polycom Trio 8800 system does not advertise on my smartphone or tablet
If the Polycom Trio 8800 system does not advertise on your smartphone or tablet device, check the
following:
● Ensure Wi-Fi is enabled on your device and the band is set to 2.4GHz or Auto. The Auto setting
allows the connecting device better access to a free wireless channel.
● Ensure the correct country of operation is set and that both bands are selected on the Polycom Trio
8800 system by configuring the following:
device.wifi.country.set="1"
device.wifi.country="CA"
features.cfg
content.wirelessDisplay.sink.bi
trate
Set the content maximum
bitrate in Mbps
30 (default)
0 - 60
0 allows auto-negotiation.
No
features.cfg
content.wirelessDisplay.sink.en
abled
0 (default) - Disable Wireless
Display.
1 - Enable Wireless Display.
No
features.cfg
content.wirelessDisplay.sink.fp
s
Set the content frame rate in
frames per second.
30 (default)
0 - 60
0 allows auto-negotiation
No
features.cfg
content.wirelessDisplay.sink.he
ight
Set the maximum content
height in pixels.
1080 (default)
0 - 1200
0 allows auto-negotiation
No
features.cfg
content.wirelessDisplay.sink.na
me
NULL - default
Specify a system name for the
local content sink for Android
or Windows devices. If left
blank the previously
configured or default system
name is used.
No
features.cfg
content.wirelessDisplay.sink.wi
dth
Set the maximum content
width in pixels.
1920 (Default and Maximum)
0 allows auto-negotiation
No
Wireless Display Parameters

Polycom Trio Visual+ Specifications

General

Brand	Polycom
Model	Trio Visual+
Category	Conference System
Language	English