Polycom Trio Visual+

Call Controls
Polycom, Inc. 96
site.cfg dialplan.routing.emerg
ency.preferredSource
Set the precedence of the source of
emergency outbound identities.
ELIN (default)— the outbound identity
used in the SIP P-Asserted-Identity
header is taken from the network using
an LLDP-MED Emergency Location
Identifier Number (ELIN).
Config— the parameter
dialplan.routing.emergency.outbou
ndIdentity has priority when enabled,
and the LLDP-MED ELIN value is used
if
dialplan.routing.emergency.outbou
ndIdentity is NULL.
No
site.cfg dialplan.routing.emerg
ency.x.description
Set the label or description for the
emergency contact address.
x=1: Emergency, Others: NULL (default)
string
x is the index of the emergency entry
description where x must use sequential
numbering starting at 1.
Yes
site.cfg dialplan.routing.emerg
ency.x.server.y
Set the emergency server to use for
emergency routing
(
dialplan.routing.server.x.addres
s where x is the index).
x=1: 1, Others: Null (default)
positive integer
x is the index of the emergency entry
and y is the index of the server
associated with emergency entry x. For
each emergency entry (x), one or more
server entries (x,y) can be configured. x
and y must both use sequential
numbering starting at 1.
Yes
Temp l at e Parameter Permitted Values
Change Causes
Restart or Reboot