Polycom VSX 3000

Administrator’s Guide for the VSX Series
4 - 10
3. Select and enter VCR/DVD settings for the VSX 7000e system:
Enable Polycom
StereoSurround
Specifies that Polycom StereoSurround is used for all calls.
To send or receive stereo audio, make sure your VSX
system is set up as described in Connecting Polycom
Microphones to Set-Top or Component Systems on page
4-1 and Connecting Speakers on page 4-6. Your system
can receive stereo audio even when it cannot send stereo.
When you use an audio mixer with Echo Canceller enabled,
the stereo input is from the mixer only and the Polycom
microphones are disabled. If Echo Canceller is disabled, the
Polycom microphones are enabled and are added to the
audio from the mixer.
VSX 7000 and VSX 7000e: When you use an audio mixer
with stereo enabled, the microphones are disabled.
VSX 8000: When you use the Balanced In echo canceller
with stereo enabled, the microphones are disabled.
Enable Live Music
Mode
Specifies whether the system transmits audio using a
configuration that best reproduces live music picked up by
microphones.
Note: Noise suppression and automatic gain control are
disabled when this setting is enabled.
Setting Description
Setting Description
VCR/DVD In Level Sets the volume at which the VCR/DVD player plays, relative
to other audio from the system.
VCR/DVD Out
Level
Sets the volume at which the call is recorded.
VCR/DVD Audio
Out Always On
Allows you to record a call using one VCR or DVD, while
playing recorded content into the call from a second VCR or
DVD.
Do not select this setting if you have only one VCR or DVD
player connected. If this setting is disabled, the VCR audio
output is disabled when VCR is the selected camera source.